Bladed Slayer - 1
Components List
(1/16 & 1/8)

  • BS - 1 Mold - Link

    • 1/16oz Head (x4)

      • Size 4 Mustad 34007 Spinnerbait Hook - Link

        • VMC 9255 will also work - Link

        • You can also downsize to a size 6 hook if you prefer

      • WEY 375 Wire Form - Link

      • WB400 Wire Keeper - Link

      Once the head is poured with the above components you will need the following to complete the build:

      • 4mm (or 5/32”) Eyes - Link

      • XS (20mm) BENT (must be BENT) Blade - Link

      • Size 1 Duo Snap - Link

    • 1/8oz Head (x4)

      • Size 2 Mustad 34007 Spinnerbait Hook - Link

        • VMC 9255 will also work - Link

        • You can pour the 1/8 head in hook sizes ranging from size 6 through size 1

      • WEY 375 Wire Form - Link

      • WB400 Wire Keeper - Link

      Once the head is poured with the above components you will need the following to complete the build:

      • 4mm (or 5/32”) Eyes - Link

      • XS (20mm) BENT (must be BENT) Blade - Link

      • Size 1 Duo Snap - Link

Bladed Slayer - 2 Components List
(1/4, 3/8, & 1/2)

  • BS - 2 Mold - Link

    • 1/4oz Head (x2)

      • 3/0 Mustad 32608 Spinnerbait Hook (or similar) - Link

        • You can also downsize to a 1/0 or 2/0 hook for a more compact presentation

      • WEY 525 Wire Form - Link

      • WB800 Wire Keeper - Link

      Once the head is poured with the above components you will need the following to complete the build:

      • 6mm (or 1/4”) Eyes - Link

      • Small (25mm) Blade: Bent - Link or Flat - Link

      • Size 2 Duo Snap - Link

      • Skirt Material - Link

    • 3/8oz Head (x2)

      • 4/0 Mustad 32608 Spinnerbait Hook (or similar) - Link

        • You can also pour this head using both a 3/0 or 5/0 hook

      • #2 Connector Link - Link

      • WB800 Wire Keeper - Link

      Once the head is poured with the above components you will need the following to complete the build:

      • 8mm (or 5/16”) Eyes - Link

      • Small (25mm) Blade: Bent - Link or Flat - Link for a fast retrieve presentation

      • Medium “Standard” (29mm) Blade: Bent - Link or Flat - Link for a slower, harder-thump, presentation

      • Size 2 Duo Snap - Link

      • Skirt Material - Link

    • 1/2oz Head (x2)

      • 5/0 Mustad 32608 Spinnerbait Hook (or similar) - Link

        • You can also pour this head with a 3/0 or 4/0 hook

      • #2 Connector Link - Link

      • WB800 Wire Keeper - Link

      Once the head is poured with the above components you will need the following to complete the build:

      • 8mm (or 5/16”) Eyes - Link

      • Medium “Standard” (29mm) Blade: Bent - Link or Flat - Link

      • Size 2 Duo Snap - Link

      • Skirt Material - Link