Go-To Finesse Mold - Link

• 1/4oz Spinnerbait

  • 3/0 Mustad 32608 Spinnerbait Hook (or similar) - Link

  • 0.035 for 1/4oz Lure Spinnerbait Wire Form - Link

  • WB800 Wire Keeper - Link

  Once the head is poured with the above components you will need the following to complete the build:

  • 6mm (or 1/4”) Eyes - Link

  • Skirt Material - Link

  • Ball Bearing Swivel with split rings - Link

  • Ball Bearing is recommended vs a barrel or crane swivel to ensure the blade spins freely.

  Main Blade (Willow, Colorado, or Indiana) - Link

  • Recommended Willow Sizes: 2-3.5 (Better for Burning and/or Moderate speed retrieve. Nickel finish for clear water & to mimic shad; Gold/Brass finish for dirty water & to mimic Bluegill/Brim. Smaller blade = faster potential retrieve. Larger blade = more drag slower retrieve.)

  • Recommended Colorado Sizes: 2-3.5 (Better for slow-rolling and very dirty water. Gold/Brass finish most common (dirty water application) but Nickle finish will still mimic a shad in clearer water.)

  • Recommended Indiana Sizes: 2-3 (Hybrid between Willow & Colorado)

  If building a Spinnerbait with more than one blade, the following is required:

  • Size 2 or 3 Clevis - Link

  • 1/8” Beads and/or Regular size Spacers - Link

  • Kicker Blade (smaller “front” blade) - Link

  • Recommended Willow Sizes: 0-1

  • Recommended Colorado Sizes: 00-1

  • Recommended Indiana Sizes: 00-1

• 1/4oz Direct Connect Bladed Jig

  • 3/0 Mustad 32608 Spinnerbait Hook (or similar) - Link

  • WEY525 Wire Form (Line Tie) - Link

  • WB800 Wire Keeper - Link

  Once the head is poured with the above components you will need the following to complete the build:

  • 6mm (or 1/4”) Eyes - Link

  • Skirt Material - Link

  • Size 1 Duo Snap (Line Tie) - Link

  • Small Shakee Blade (~20mm) - Link TBD

    • Can potentially be found on Amazon, Ali Express, eBay, or other online retailers. Barlow’s Tackle will carry them in the near future. Update with that link is pending.

• 1/4oz Skirted Underspin

  • 3/0 Victory 10575 Hook (or similar) - Link

  • WEY525 Wire Form (blade connection) - Link

  • WB800 Wire Keeper - Link

  Once the head is poured with the above components you will need the following to complete the build:

  • 6mm (or 1/4”) Eyes - Link

  • Skirt Material (Optional) - Link

  • Size 12 Mighty Mini Crane Swivel - Link

    • Given the size of the head and placement of the blade, a high quality crane swivel, like the Mighty Mini (vs heavier ball bearing swivel), will be sufficient to ensure the blade spins properly.

  • Size 0 Split Ring (swivel to blade connection) - Link

  • Willow Leaf Blade - Link

    • Recommend sizes 1-3

• 1/8oz Underspin (x2)

  • 1/0 - 3/0 90-Degree Hooks - Link

    • Mustad 32755 & Victory 10575 (or similar)

  • WEY525 Wire Form (blade connection) - Link

  • WB400 Wire Keeper - Link

  Once the head is poured with the above components you will need the following to complete the build:

  • 4mm (or 5/32”) Eyes - Link

  • Size 14 or 12 Mighty Mini Crane Swivel - Link

    • Given the size of the head and placement of the blade, a high quality crane swivel, like the Mighty Mini (vs heavier ball bearing swivel), will be sufficient to ensure the blade spins properly.

  • Size 0 Split Ring (swivel to blade connection) - Link

  • Willow Leaf Blade - Link

    • Recommend sizes 1-2

• 1/16oz Underspin

  • Size 6 - 1/0 90-Degree Hooks - Link

    • Mustad 32755 & 32570 (or similar)

  • WEY375 Wire Form (blade connection) - Link

  • WB400 Wire Keeper - Link

  Once the head is poured with the above components you will need the following to complete the build:

  • 4mm (or 5/32”) Eyes - Link

  • Size 12 Mighty Mini Crane Swivel - Link

    • Given the size of the head and placement of the blade, a high quality crane swivel, like the Mighty Mini (vs heavier ball bearing swivel), will be sufficient to ensure the blade spins properly.

  • Size 0 Split Ring (swivel to blade connection) - Link

  • Willow Leaf Blade - Link

    • Recommend sizes 0-1